Rough Country
4.5 INCH LIFT KIT FORD SUPER DUTY 4WD (2005-2007)
4.5 INCH LIFT KIT FORD SUPER DUTY 4WD (2005-2007)
PRICE INCLUDES PARTS AND INSTALLATION
Give your 05-07 Ford Super Duty an impressive upgrade, front to back with Rough Country’s 4.5" Ford Suspension Lift Kit! This easy-to-install lift kit raises the front of your vehicle to be equal height with the rear for a leveled, better-than-stock look that gives an improved ride height and more aggressive appearance.
This kit features a set of front, lifted coil spacers allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm fropbrackets and track bar drop bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting.
A set of Rough Country's premium N3 shocks are also included. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.
Get the wheels you want! Rough Country's 4.5" Suspension Lift Kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing.
Best of all, Rough Country's 4.5" Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
FEATURES
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
NOTES - IMPORTANT
- Does NOT fit V-8 gas engine models.
- Does NOT fit dually models.
- V-10 gas engine models will require exhaust modification to clear the front driveshaft.
- A carrier bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. (#1197)
VEHICLE FITMENT
| YEARS | DRIVE | MAKE | MODEL |
|---|---|---|---|
| 2005-2007 | 4WD | Ford | F-250 Super Duty |
| 2005-2007 | 4WD | Ford | F-350 Super Duty |
| TIRE | WHEEL | BOLT PATTERN | OFFSET | NOTE |
|---|---|---|---|---|
| 35x12.50R17 | 17x8.5 | 8x170 | +0 | - |
| 35x12.50R17 | 17x8.5 | 8x170 | +1 | - |
| 35x12.50R17 | 17x9 | 8x170 | -12 | - |
| 35x12.50R17 | 17x9 | 8x170 | +0 | - |
| 35x12.50R17 | 17x9 | 8x170 | +1 | - |
| 35x12.50R18 | 18x8.5 | 8x170 | +0 | - |
| 35x12.50R18 | 18x8.5 | 8x170 | +1 | - |
| 35x12.50R18 | 18x9 | 8x170 | -12 | - |
| 35x12.50R18 | 18x9 | 8x170 | +0 | - |
| 35x12.50R18 | 18x9 | 8x170 | +1 | - |
| 35x12.50R18 | 18x10 | 8x170 | -25 | - |
| 35x12.50R18 | 18x10 | 8x170 | -24 | - |
| 35x12.50R18 | 18x10 | 8x170 | -19 | - |
| 35x12.50R18 | 18x10 | 8x170 | -18 | - |
| 35x12.50R20 | 20x9 | 8x170 | -12 | - |
| 35x12.50R20 | 20x9 | 8x170 | +0 | - |
| 35x12.50R20 | 20x9 | 8x170 | +1 | - |
| 35x12.50R20 | 20x10 | 8x170 | -25 | - |
| 35x12.50R20 | 20x10 | 8x170 | -24 | - |
| 35x12.50R20 | 20x10 | 8x170 | -19 | - |
| 35x12.50R20 | 20x10 | 8x170 | -18 | - |
| 35x12.50R20 | 20x12 | 8x170 | -44 | Trimming Required |
| 35x12.50R22 | 22x10 | 8x170 | -25 | - |
| 35x12.50R22 | 22x10 | 8x170 | -24 | - |
| 35x12.50R22 | 22x10 | 8x170 | -19 | - |
| 35x12.50R22 | 22x10 | 8x170 | -18 | - |
| 35x12.50R22 | 22x12 | 8x170 | -44 | Trimming Required |
